Transform
The Way
You Repair
Repairing Solutions
PHASTER® is the game changer in repair solutions. Based on our proprietary chemistry, PHASTER® delivers superior adhesion performance and processing ease without many of the hazards associated with traditional epoxy and polyurethane systems.
Think PHASTER®.
PRODUCTS
Ambient Cure Foaming & Non-Foaming Repair Materials
Two-Component Rapid Cure Adhesive With Superior Peel Strength
Well-suited for fast, high-strength repairs, PHASTER® rapid-cure adhesives enable rapid bonding and repair of a wide variety of substrates, including metals, often with no pretreatment.
Why PHASTER®?
- Superior peel strength vs competitive adhesives
- Excellent lap shear strength
- Primerlesss, abrasion-free, and pretreatment-free adhesion*
- 26% sustainable bio-content
- No sharp, pungent odors
*Always follow SDS and TDS application guidelines.
Potential Applications
Small Home Repairs & DIY Applications
Properties and performance may vary by product.
Resources
Two-Component Rigid Foaming Adhesives
PHASTER® Rigid Foaming Adhesives are two-component ambient temperature cured products that bond to a wide variety of substrates and foam to fill variable gaps.
The compressive strength of this material, along with the adhesion and foaming behavior, enables structural repairs to be made, providing value over other foam-in-place technologies.
Why PHASTER®?
- Excellent adhesion to a wide variety of substrates, including wood and cement
- Foaming for gap-jumping applications
- High compressive strength at low-density
- Machinable, sandable, stainable, and paintable
- Primerlesss, abrasion-free, and pretreatment-free adhesion*
*Always follow SDS and TDS application guidelines.
Potential Applications
Load-Bearing Structural Reinforcement & Repair
Structure & Panel Reinforcement & Repair
Properties and performance may vary by product.
Resources
RIGID FOAMING ADHESIVE FOR WALL REPAIR
PHASTER® two-component ambient temperature cure structural foams are used to repair holes in drywall, wood, plaster, and concrete and restore strength so that mechanical fasteners can be replaced or used at the location of the repair.
Why PHASTER®?
- High strength for fastener mounting
- Rapid cure for quick return to service
- Efficient application with no special surface preparation
- No toxic isocyanates vs polyurethane products
- Approx. 12% renewable bio-content
- No pungent odors from mercaptans or strong-smelling amines
Potential Applications
REPAIR HOLES
RESTORE STRENGTH FOR ANCHORS
Properties and performance may vary by product.
Resources
DISCOVER
Custom Engineered Solutions
Superior Adhesion Performance
- Excellent durability and superior bond strength.
- Bonds to damp surfaces.
- Resistant to moisture.
- Resistant to a wide range of chemicals.
Handline & Processing Ease
- Fast curing at ambient temperatures.
- Typically, no surface preparation or pre-treatment needed.
- Suitable for use under various indoor and outdoor application conditions.
- Low sensitivity to mix ratio variation and varying ambient temperatures during application.*
*Compared to traditional polyurethane and epoxy systems. Always follow TDS application guidelines.
Safe Processing
- Inherently flame resistant.
- No hazardous isocyanates.
- No sharp, pungent odors.
- No flammability pictographs for uncured material.
- No tin or metal catalysts.
- Typically, no known chronic respiratory hazards.
Flexibility in Design
- Bonds to a wide variety of substrates.
- Base formulations can be modified to vary the amount of foaming for irregular surface matching and low-density bonding and sealing to fit individual customer needs.
- Individual products can be designed based on specific application needs.
#LLProducts